Table of Contents
Advertisement
Item
Input registered NS Record, ex. ns1, ns2.
DNS Server
Assign WAN IP address as corresponding IP of NS Record. The system will show all
Interface
acquired enabled WAN IP addresses automatically so that users can check directly. But
users have to check if the IP addresses are the same as the corresponding settings on
DNS service provider. (Ex. ns1.abc.com.tw
ns2.abc.com.tw
5. Host Record: Add or modify host record. (A Record)
Item
Input the host name which provides services. E.g. mail server or FTP.
Host Name
Check corresponding A Record IP (WAN Port IP). If more than one IPs is checked,
WAN IP
Inbound traffic will be distributed on this WANs.
6. Alias Record: Add or modify alias record. (CNAME Record)
This
kind of record allows you to assign several names to one computer host, which may provide several
services on it.
For
instance, there is a computer whose name is "host.mydomain.com" (A record). It provides WWW and
Mail services concurrently. Administrator can configure as two CNAME: WWW and Mail. They are
"www.mydomain.com" and "mail.mydomain.com". They are both orientated to "host.mydomain.com."
You
can also assign several domain names to the same IP address. One of the domains will be A record
Description
WAN2: 200.1.1.1)
Description
Gigabit Content Security Router User's Manual
WAN1: 210.10.1.1,
- 114 -
Advertisement
Table of Contents
