Dual-Stack Ip (Ipv4 And Ipv6) - Planet CS-5800 User Manual

6.1.4.2 Dual-Stack IP (IPv4 and IPv6)

Use rs have to enable Dual-Stack IP in the IP mode section in advance to configure the WAN with IPv6
addressing.
Obtain an Automatic IP automatically:
s mode is often used in the connection mode to obtain an automatic DHCP IP. This is the device
Thi
system default connection mode. It is a connection mode in which DHCP clients obtain an IP address
automatically. If having a different connection mode, please refer to the following introduction for selection of
appropriate configurations. Users can also set up their own DNS IP address. Check the options and input the
user-defined DNS IP addresses.
Item
Use the Following DNS
Server Addresses
DNS Servers
MTU
Use the Following DNS
Server Addresses
Description
Select an user-defined DNS server IP address.
Enter the DNS server IP address, you must have to enter a DNS server IP
address, maximum two DNS servers IP addresses available..
"Auto" and "Manual" can be chosen. The default value is 1500. Different value
could be set in different network environment.
(e.g. ADSL PPPoE MTU: 1492)
The default is "Auto".
Select an user-defined DNS server IP address.
Gigabit Content Security Router User's Manual
- 36 -