Table of Contents
Advertisement
7.7 Port Group Management
Service ports can be grouping as IP grouping. It is convenient to set QoS, firewall access rules, and other
functions.
Item
User edit port
Name
Protocol
Port Range
Add to Port List
Group Name
Delete Group
button
Delete
Apply
Description
Input the name, protocol, and port range for the specific service port.
Name the Port in order to identify its property. For example, Virus 135.
Choose the port protocol form the pull down list like TCP, UDP or TCP and
UDP.
Input the port range. For example, 135 to 135.
After setting name, protocol and port range, push this button to add the
information into the Port list below. This port can be from some port groups.
When you add new groups, please note if the group name is in the column. For
example, Virus.
Choose the group that you would like to delete from the pull- down list, and
push the "Delete Group" button. System will ask you again if you would like to
delete the group. After pushing the confirmation button, the group will be
deleted.
You can choose several ports from Port list on the left side, and push this
button to have them added into the group the right side.
Delete self- defined port or port range.
Click "Apply" to save the network configuration modification
Gigabit Content Security Router User's Manual
- 74 -
Advertisement
Table of Contents
