Planet CS-5800 User Manual page 132

Status
Item
Operation-Slave Mode
WAN Backup
(The Checked WANs
are not working in this
device.)
LAN Gateway Backup
MAC Address of the
backup device
Status
"Status-Normal" means both two devices operate normally. "Status-Backup"
indicates Slave mode has problems, and the device enables backup to take over
WAN
Description
Although working with master device, Backup device's DHCP server is disabled.
LAN users need to transmit traffic through the WAN on Slave device. You should
add LAN IP of Slave device into Master device DHCP server default gateway,
which is DHCP server IP address.
For example, if the DHCP server's IP of Master device is 192.168.1.1, and the
subnet mask is 255.255.255.0, Salve device should be in the same subnet, ex.
192.168.1.2.
The checked WANs will works in another device. For an example, if WAN1 and
WAN2 work in this device, and WAN3 and WAN4 work in another, WAN3 and
WAN4 should be checked.
Input the LAN IP of Master device. It should be different from Slave device's IP.
(Must be in the same subnet.)
Input the LAN MAC of Master device. It should be different from Salve device's
LAN MAC.
"Status-Normal" indicates both devices work normally; "Status-Backup" indicates
the Backup device is enabled for backing up Master device to take over WAN
connection and DHCP issuing function.
Gigabit Content Security Router User's Manual
- 126 -