Table of Contents
Advertisement
Item
To activate or close the One-to-One NAT function. (Check to activate the function).
Enabled One to
One NAT
Input the Private IP address for the Intranet One-to-One NAT function.
Private IP Range
Begin
Input the Public IP address for the Internet One-to-One NAT function.
Public IP Range
Begin
The numbers of final IP addresses of actual Internet IP addresses. (Please do not
Range Length
include IP addresses in use by WANs.)
Add this configuration to the One-to-One NAT list.
Add to List
Remove a selected One-to-One NAT list.
Delete Selected
Item
Click "Apply" to save the network configuration modification.
Apply
Click "Cancel" to leave without making any changes.
Cancel
Description
Gigabit Content Security Router User's Manual
- 105 -
Advertisement
Table of Contents
