Planet CS-5800 User Manual page 30

Gigabit content security router

Table of Contents

Click "Unified IP Management" to enter the configuration page, as shown in the following figure. Input the

respective IP addresses and subnet masks.

To configure global IPv6 prefixes for your LAN devices, go to the WAN Setting, click the IPv6 tab,

and click Edit for the WAN interface. Then enter the LAN IPv6 Address.

Note

After the changes are completed, click "Apply" to save the configuration. Click "Cancel" to leave without

making any change.

Gigabit Content Security Router User's Manual

- 24 -

Table of Contents