Table of Contents
Advertisement
One-to-One NAT mode will change the firewall working mode. If this function has been set up,
the Internet IP server or PC which is mapped with a LAN port will be exposed on the Internet.
Attentio
To prevent Internet users from actively connecting with the One-on-One NAT server or PC,
n
please set up a proper denial rule for access, as described Firewall.
Multiple to One NAT
Item
Click to enable multiple to one NAT function.
Enable Multiple
to One NAT
Input intranet IPs for NAT mapping.
Private IP Range
Input the respective public IP addresses. This should go along with the following
Respective
interface selection. If the IP address is not within the interface ranges, the setting will
Public IP
not work.
Select the mapping interface. If the WAN IP above is not within the interface range, the
Interface
setting will not work.
Add this configuration to the One-to-One NAT list.
Add to List
Remove a selected One-to-One NAT list.
Delete selected
Description
Gigabit Content Security Router User's Manual
- 106 -
Advertisement
Table of Contents
