Interface
Enable
Add To List
Delete selected
application
Moving Up & Down
The rules configured in Protocol Binding will be executed by the device according to their priorities
too. The higher up on the list, the higher the priority of execution.
Note
be restricted to a specific WAN. If only specific Service Ports need to be
designated, while a specific IP destination assignment is not required, input "0"
into the IP boxes.
Select the WAN for which users want to set up the binding rule.
To activate the rule.
To add this rule to the list.
To remove the rules selected from the Service List.
The priority for rule execution depends on the rule order in the list. A rule
located at the top will be executed prior to those located below it. Users can
arrange the order according to their priorities.
Gigabit Content Security Router User's Manual
- 52 -