Planet CS-5800 User Manual page 49

Gigabit Content Security Router User's Manual
Import Strategy
A division of traffic policy can be defined by users too. In the "Import Strategy" window, select the WAN or
WAN group (ex. WAN 1) to be assigned and click the "Import IP Range" button; the dialogue box for
document importation will be displayed accordingly.
A policy document is an editable text document. It may contain a destination IP users designated. After the
path for document importation has been selected, click "Import", and then at the bottom of the configuration
window click "Apply". The device will then dispatch the traffic to the assigned destination IP through the WAN
(ex. WAN 1) or WAN grouping users designated to the Internet.
To build a policy document users can use a text-based editor, such as Notepad, which is included with
Windows system. Follow the text format in the figure below to key in the destination IP addresses users want
to assign.
For example, if the destination IP address range users want to designate is 140.115.1.1 ~ 140.115.1.255, key
in 140.115.1.1 ~ 140.115.1.255 in Notepad. The next destination IP address range should be keyed in the
next line. Attention! Even if only one destination IP address is to be assigned, it should follow the same format.
For example, if the destination IP address is 210.66.161.54, it should be keyed in as
210.66.161.54~210.66.161.54. After the document has been saved (the extension file name is .txt), users can
import the IP range of self-defined strategy.
- 43 -