Counting System; Scope Of Delivery / Serial Accessories - KERN CFS Operating Manual

6.2.2

Counting system

Bulk material balance KERN KFP
In factory the counting system KERN CCS is preconfigured in a way that no
more changes will be necessary.
When connecting a weighing bridge (not preconfigured by KERN) the follow-
ing must be observed:
Connect weighing bridge with a suitable cable via the second-balance in-
terface.
Allocation of the interface connection see chapter 14.
Configure weighing bridge, see chapter 13
Adjust balance / weighing bridge, see chapter 7.2
6.2.3

Scope of delivery / serial accessories

KERN CFS
• Balance see chpt. 6.2.1)
• Power cable
• Protective cover
• Internal battery
• Operating Manual
12
KERN CCS
Reference balance KERN CFS
KERN CCS
• Ref. balance KERN CFS, see chap. 6.2.1
• Bulk mat. balance KERN CFS, see chap. 6.2.2
• Operating instructions KERN CFS/CCS
• Operating instructions KERN KFP
CFS/CCS-BA-e-1013