KERN CFS Operating Manual page 23

Add up:
Place goods to be weighed A.
Wait until the stability display appears, then press
number of items are stored and printed out.
Remove the weighed good. More weighed goods can only be added when the
display = zero.
Place goods to be weighed B.
Wait until the stability display appears, then press
number of items are added in the summation memory and printed out. Total
weight, number of weighing procedures as well as total parts counting appear 2
sec.
Add more weighed goods as described before.
Please note that the balance must be unloaded between the individual weighing
procedures.
This process can be repeated 99 times or until the weighing range of the balance
is exhausted.
Display of the saved weighing data:
Press , the total weight, number of weighing procedures as well as total num-
ber of items are displayed.
Total weight placed on
balance:
Delete weighing data:
Press , the total weight, number of weighing procedures as well as total num-
ber of items are displayed. During this display press
tion memory are deleted.
CFS/CCS-BA-e-1013
Number of weighing
procedures:
. The weight value or the
. The weight value or the
Total number of pieces:
. The data in the summa-
23