Display of tolerance mark
Display of tolerance mark
The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „
For tolerance control, just one limit value can be set.
If both limit values are deleted, the tolerance control is deactivated.
11.2 Tolerance control in counting mode
Press
, the active tolerance weighing mode is
indicated.
If necessary, with
mode" select [
Press
, the currently set upper limit value is dis-
played.
Using numeric keyboard enter desired value e.g. 50
items or delete using
Press
, the currently set lower limit value is dis-
played.
Using numeric keyboard enter desired value e.g. 40
items or delete using
30
, if weighing goods within the specified tolerance:
, if weighing goods above the specified tolerance:
Operation
"Tolerance control weighing
]
.
.
„ see chpt. 12.2)
Display
CFS/CCS-BA-e-1013