KERN CFS Operating Manual page 31

Press , tolerance control is started. The
Determine the average piece weight (see chpt. 10.1 or 10.2), place the weighing
goods and check using the tolerance mark
is under, within or above the specified tolerance.
Display of tolerance mark
Display of tolerance mark
Display of tolerance mark
The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „
For tolerance control, also only one limit value can be set.
If both limit values are deleted, the tolerance control is deactivated.
CFS/CCS-BA-e-1013
, if the number of the placed pieces
, if weighing goods are under the specified tolerance
, if weighing goods within the specified tolerance
, if weighing goods above the specified tolerance:
symbol over appears.
„ see chpt. 12.2)
31