Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KERN CIB
Summary of Contents for KERN CIB
- Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com Internet: www.kern-sohn.com Operating manual Counting balances KERN CIB Version 1.0 2020-09 CIB-BA-e-2010...
-
Page 2: Table Of Contents
KERN CIB Version 1.0 2020-09 Operating manual Counting balances Contents Technical data ....................4 Appliance overview ..................5 Overview of displays ........................ 6 2.1.1 Display weight ..........................6 2.1.2 Display reference weight ......................7 2.1.3 Display piece quantity......................... 7 2.1.4 Power supply unit display ...................... - Page 3 Background illumination of display – UF-4 ................. 36 Servicing, maintenance, disposal .............. 38 12.1 Cleaning ..........................38 12.2 Servicing, maintenance ......................38 12.3 Disposal ........................... 38 12.4 Error reports ........................... 38 Instant help ....................39 Declaration of conformity ................40 CIB-BA-e-2010...
-
Page 4: Technical Data
Mains adapter 100-240 V, 50/60 Hz; balance 12 V, 1000 mA Rechargeable battery Without display backlighting Operating duration approx. 160 h / loading time approx. 14 hours With display backlighting: Operating duration approx. 90 h / loading time approx. 14 hours CIB-BA-e-2010... -
Page 5: Appliance Overview
2 Appliance overview 1. Weighing pan 7. Battery compartment 2. Keyboard 8. Mains connection 3. Display 9. Adjustment switch 4. Battery charge status display 5. Bubble level 6. Adjustment feet CIB-BA-e-2010... -
Page 6: Overview Of Displays
2.1 Overview of displays Weight Reference weight Quantity LED power supply unit 2.1.1 Display weight Here, the weight of your goods is displayed. The overlay indicates: Tare value in memory placed weighing good tared Zeroing display CIB-BA-e-2010... -
Page 7: Display Reference Weight
Memory locations 01-10 Memory locations 11-20 Data in sum memory 2.1.4 Power supply unit display If the LED next to this symbol glows green, the power green supply unit is correctly connected and the rechargeable battery is being charged. CIB-BA-e-2010... -
Page 8: Keyboard Overview
2.2 Keyboard overview CIB-BA-e-2010... - Page 9 Call up counting with target weight Call up counting with tolerance control Enter reference weight through weighing Display reference weight stored last Store reference weights in memory Call up stored reference weights Call up sum memory CIB-BA-e-2010...
- Page 10 Addition in sum memory Call up sum memory In menu: Confirm selected setting Zeroing key In menu: Scroll up Decimal digit: To left Taring key In menu: Scroll down Decimal digit: to right CIB-BA-e-2010...
-
Page 11: Basic Information (General)
• The balance may only be used according to the described conditions. Other areas of use must be released by KERN in writing. 3.3 Warranty Warranty claims shall be voided in case •... -
Page 12: Monitoring Of Test Resources
Information is available on KERN’s home page (www.kern-sohn.com) with regard to the monitoring of balance test substances and the test weights required for this. In KERN's accredited calibration laboratory test weights and balances may be calibrated (return to the national standard) fast and at moderate cost. -
Page 13: Unpacking, Setup And Commissioning
Check if that there has been no damage and that all packing items are present. Scope of delivery / serial accessories Balance Weighing plate Mains adapter Protective cover Internal battery Operating manual CIB-BA-e-2010... -
Page 14: Placing
6.3 Mains connection Power is supplied via the external mains adapter. The stated voltage value must be the same as the local voltage. Only use original KERN mains adapters. Using other makes requires consent by KERN. If the LED next to this power supply unit symbol glows green, the power supply unit is connected correctly. -
Page 15: Start-Up
After that the balance will change automatically into the weighing mode, the zero display appears in all three display windows and the balance is now ready for operation: is pressed longtime during the segment test, the software date will appear. Example: 2020-04-01. CIB-BA-e-2010... -
Page 16: Switch Off
The adjustment weight you use is dependent on the capacity of the balance. Perform adjustment as close as possible to the maximum load. Info about test weights can be found on the Internet at: http://www.kern-sohn.com • Observe stable environmental conditions. A warm up time (see chapter 1) is required for stabilization. -
Page 17: Adjustment Menu
With numeric keys Confirm setting Press Return to weighing mode/ exit function without saving Press Menu overview adjustment menu Menu item Description of function ECF-1 Adjustment weight ECF-2 Zero point adjustment ECF-3 Adjustment weight and AD converter value CIB-BA-e-2010... - Page 18 * The adjustment should be made with the recommended adjustment weight (see chap. 1 "Technical data"). Weights of different nominal values may also be used for adjustment but are not optimal for technical measuring. Info about adjustment weights can be found on the Internet at: http://www.kern- sohn.com CIB-BA-e-2010...
-
Page 19: Piece Counting
Unload the weighing plate and place the parts to be counted on the weighing plate. The weight of all parts, the piece weight and the number of parts are displayed. CIB-BA-e-2010... -
Page 20: Numeric Input Of The Reference Weight
Add additional parts now until the [ ] display disappears. An audio signal indicates that reference optimization has been carried out. At every reference optimisation, the reference weight is calculated anew. As the additional parts increase the base for the calculation, the reference also becomes more exact. CIB-BA-e-2010... -
Page 21: Store/Call Up Reference Weight
Then press longtime the button „S 00“ is displayed flashing. Enter the desired memory location via the numeric keyboard and confirm by The memory location has now been allocated by the reference weight, the balance is in weighing mode. CIB-BA-e-2010... -
Page 22: Call Up Via Numeric Keyboard
Unload the weighing plate and enter the reference weight via the numeric keyboard. (example) After that press , followed by . „PLU 00“ is displayed. Then press the desired quick button. The reference weight is now stored in this button. CIB-BA-e-2010... -
Page 23: Call Up Via Quick Keyboard
[ ] display shows which memory place group has been selected at the moment: 7.5.4 Call up via quick keyboard Unload the weighing plate and press the respective quick button, the stored reference weight is displayed. Now it is possible to count. CIB-BA-e-2010... -
Page 24: Counting With Target Piece Number
(example) Acknowledge with . „On“ is shortly displayed, the function is enabled. The balance changes automatically into target piece counting mode. (example) Count-in the parts, when display green and no signal sounds, the target piece number is reached. CIB-BA-e-2010... -
Page 25: Count With Tolerance Control - Fill To Target
, enter „000000“ and confirm by First determine the piece weight as specified in chap. 7.1 or 7.2. (example) Press longtime, the display for entering the lower limit value „PCS L“ appears. Enter the lower limit value and confirm (example) with CIB-BA-e-2010... - Page 26 Note: If in the display appears: a wrong input was entered. Finish the input by and enter the values anew. Delete tolerance value: In weighing mode press , enter „000000“ and confirm by CIB-BA-e-2010...
-
Page 27: Taring
• To delete the stored tare value, unload the weighing plate and then press the TARE key; the [ ] display next to the symbol disappears. • The taring process can be repeated any number of times. The limit is reached when the whole weighing range is exhausted. CIB-BA-e-2010... -
Page 28: Numerical Input Of Tare Weight (Pre-Tare)
The tare weight is displayed as negative value. Now you can weigh into the container, the tare weight will automatically be deducted. • To delete the pre-tare value with unloaded weighing plate, press CIB-BA-e-2010... -
Page 29: Totalization
(example) Weigh-in more parts as specified. Please note that the balance must be unloaded between the individual weighing procedures. This process can be repeated up to 99 times or until the weighing range of the balance is exhausted. CIB-BA-e-2010... -
Page 30: Add Up "Weight
(example) Remove the weighing good and place the weighing good of the second count and press „r02“ is shortly displayed, followed by the weight, the piece weight and the number of parts of the second weighing. CIB-BA-e-2010... -
Page 31: Delete Stored Values
To delete the stored weighing data press and keep it pressed until a signal sounds two times. Stored values, total weight, total number of pieces and number of weighings will be set to zero. The [ ] display next to "M+" disappears. CIB-BA-e-2010... -
Page 32: Menu
Select menu block • Use to return to previous menu item • Use to advance to next menu item Set parameter • With numeric keys Confirm setting Press Return to weighing mode/ exit function without saving Press CIB-BA-e-2010... -
Page 33: Menu Overview Functions Menu „Uf 1-10
UF-6 No interface available RS232 interface UF-7 Speed can be set from 1 to 3 (1 = slow (7.5hz), Speed 1 2 = medium (15hz), 3 = fast (30hz) A/D Update Speed 2 Rate Speed 3 CIB-BA-e-2010... - Page 34 UF-8 ZP 0 Not documented ZP 1 ZP 2 ZP 3 ZP 4 ZP 5 UF-9 Function blocked. Operate the adjustment switch to adapt the Gravitation value. UF-10 Not documented CIB-BA-e-2010...
-
Page 35: Operation
, „AoFF00“ will appear flashing. Use the numeric keyboard to set the number of minutes after which the display is automatically switched off. Here as example 10 minutes. (example) Confirm input with , the balance automatically returns to the menu. CIB-BA-e-2010... -
Page 36: Background Illumination Of Display - Uf-4
Now the following settings can be carried out: • Lit 0 = Auto Backlight (background illumination switches off approx. 10 sec. after reaching a stable weighing value) • Lit 1 = background illumination on • Lit 2 = background illumination off CIB-BA-e-2010... - Page 37 Use the numeric keyboard to enter the corresponding code number of the desired type of background illumination. Confirm input with , the balance automatically returns to the menu. Return to weighing mode using The display appears in the desired setting. CIB-BA-e-2010...
-
Page 38: Servicing, Maintenance, Disposal
Spilled weighing goods must be removed immediately. 12.2 Servicing, maintenance The appliance may only be opened by trained service technicians who are authorized by KERN. Before opening, disconnect from power supply. 12.3 Disposal Disposal of packaging and appliance must be carried out by operator according to valid national or regional law of the location where the appliance is used. -
Page 39: Instant Help
• Adjustment is no longer correct. • Great fluctuations in temperature. • Electromagnetic fields / static charging (choose different location/switch off interfering device if possible) Should other error messages occur, switch balance off and then on again. If the error message remains inform manufacturer. CIB-BA-e-2010... -
Page 40: Declaration Of Conformity
14 Declaration of conformity The current EC/EU Conformity declaration can be found online in: www.kern-sohn.com/ce For verified weighing scales (= weighing scales assessed for conformity) a declaration of conformity is included in the scope of delivery. CIB-BA-e-2010...
Need help?
Do you have a question about the CIB and is the answer not in the manual?
Questions and answers