Numeric Entering Of Tare Weight; Adding; Manual Totalizing - KERN CFS Operating Manual

8.4.2

Numeric entering of tare weight

Unload and reset to zero the balance
Enter known tare weight numerically with decimal dot and press
The entered weight will be stored as tare weight and displayed with negative
sign.
The [ ] symbol over NET appears.
Put the filled weighing container on the balance, the net weight will be displayed.
The tare value remains stored until it will be deleted by
The tare value will be rounded up according to the readability of the balance,
e.g. at a balance 60 kg max/5 g readability the input value of 103 g will be
displayed as -105 g.

9 Adding

The balance can totalize weight values or piece quantities.
When using in the counting system, no matter, if the weighed goods are on the ref-
erence or on the bulk material balance.
Preparing:
When using as counting system select using
totalized. The appeared [ ] displays the current balance.
When totalizing in counting mode set the average piece weight.
(see chpt. 10.1 or 10.2)
If necessary, tare the empty balance container.

9.1 Manual totalizing

With this function the individual weighing values are added into the summation
memory by pressing
• Menu settings:
„F1 off" „ACC"
see chpt. 12.2
• When using as counting system there can be totalized on the reference as
well as on the bulk material balance.
Before the totalizing process select the active balance, see chpt. 8.3.
22
and edited, when an optional printer is connected.
„ON" and „F2 Prt"
.
.
the balance, on which will be
„P mode" „Print"
CFS/CCS-BA-e-1013
„Au OFF",