Preface - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual Rev 4.0

PREFACE

Thank you for selecting the new AX1 Security and Home Automation system. This manual
will explain to you on how to operate your AX1 security and home automation system. This
system is made up of a control panel, keypads, integrated switch module and telephone voice
module. Specific areas of detections are called zones. Zones can be programmed to have
different characteristics. Some zones may be 24-hour zones; they remain armed even when
the alarm system is asleep. (This setting is done during the installer programming as per
user‟s request). In addition, some zones can be programmed by the users to allow bypassing.
When you bypass a zone, the zone is temporarily removed from the alarm system. Always
remember that bypassed zones are not protected.
How does your AX1 security and home automation system work?
When a detection device is triggered, the zone indicator will light up. If the alarm system is
armed, the control panel responds by reporting an alarm condition. The control of the system
can be done either through keypad or telephone. If the alarm system is triggered, the signal
can be transmitted to a central monitoring station (CMS). (Provided the AX1 system is
connected to CMS)
For safety purposes, the operation of the AX1 system requires the users to enter the personal
identification number (PIN). User is advised to disable the installer access whenever
necessary. (i.e. commissioning and servicing)
1