AX1 LCD & ICON User Manual
1.0.3 DISARMING
Press [▼] or [▲]
to choose to disarm all
or by partition
Press [#] to select
SELECT:
PARTITION 1
Press [▼] or [▲]
to choose
Partition to disarm
Press [#] to select
PARTITION IS NOW
DISARMED
1.0.4 ALARM REPORTING
When alarm occurs, the strobe lights and the bells will be turned on. If the system is disarmed, it
could only turn off the bell but not the strobe light. At the moment, the User can trace back which
zone has been violated previously.
01 - 01 – 2010 Mon
12 : 00
Press [User PIN] [*]
to enter user menu
ARM
DISARM
Press [#] to
DISARM
ALL
PARTITION
If „ALL‟ is selected
Partition is not
armed – partition
cannot be disarmed
PARTITION NOT
01 - 01 – 2010 Mon
12 : 00
Press [User PIN] [*]
to enter user menu
USER PROGRAM
ALARM REPORT
CLEAR ALARM
Press [#]
ZONE 01
System is now
SYSTEM IS NOW
DISARM
ARM
Rev 4.0
disarm
This partition does
not exists
REQUEST REJECTED
15