AX1 LCD & ICON User Manual
CHAPTER 7: SYSTEM CHECKING
7.0
TROUBLE
TROUBLE
DC Loss (Low Battery)
Bell Strobe Siren Loss
External
Communication Error
Internal
Communication Error
AC Loss
Phone Line Loss
Tamper
7.0.1 TROUBLE VIEWING BY USING KEYPAD
Press [User PIN] [*]
to enter user menu
Press [▼] or [▲]
to choose
„SYSTEM‟
from main menu
Press [#] to select
Press [▼] or [▲]
to choose
„TROUBLE‟
Press [#] to select
Press [▼] or [▲] to choose
to see the trouble status
Press [*] to return to previous
menu
7.0.1.1 QUICK VIEW TROUBLE
COMMAND
Press and hold the button [8] for 2 seconds
CAUSES
The Backup battery is weak or the backup battery not connected
Either bell, Strobe or Siren is loss.
Unable to call out either due to no reply by user during reporting.
Will be cleared when key "6" is press (clear alarm memory).
Avan Touch keypad, IO Expander and Zone Expander cannot
communicate with control panel due to main board or connection failure
No power supply detected
No phone line connected to the system
Tamper occurred and has not been cleared by alarm memory clear
01 - 01 – 2010 Mon
12 : 00
USER
SYSTEM
TEST
TROUBLE
− BELL STROBE
SIREN LOSS
INFORMATION
View trouble condition
Rev 4.0
35