Clear Alarm Memory; Quick Clear Alarm Memory - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual

1.0.5 CLEAR ALARM MEMORY

When alarm occurs, the strobe lights and the bells will be turned on. If the system is disarmed, it
could only turn off the bell but not the strobe light. Thus, the user needs to clear the alarm memory to
turn off the strobe light. Besides that, once the alarm memory is cleared, the auxiliary power supply 1
will be reset for 3 seconds before restoring it again.

1.0.5.1 QUICK CLEAR ALARM MEMORY

COMMAND
Press and hold the button [6] for 2 seconds
01 - 01 – 2010 Mon
12 : 00
Press [User PIN] [*]
to enter user menu
 CLEAR ALARM
BYPASS
Press [▼] or [▲]
to choose
„CLEAR ALARM‟
from main menu
Press [#] to select
ALARM CLEARED
INFORMATION
Clear alarm memory
Rev 4.0
16