Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for O.Y.L. Technology AX1
Summary of Contents for O.Y.L. Technology AX1
-
Page 1: User Manual
Security & Home Automation System AX1 LCD & ICON USER MANUAL (REVISION 4.0) - Page 2 AX1 LCD & ICON User Manual Rev 4.0...
-
Page 3: Table Of Contents
AX1 LCD & ICON User Manual Rev 4.0 CONTENTS PREFACE FEATURES AX1 LCD USER MANUAL LCD KEYPAD OUTLOOK ARMING MODE SOUND INDICATION LIGHT INDICATION KEYPAD NAVIGATION KEY FUNCTION OVERALL LCD KEYPAD MENU TREE CHAPTER 1: ALARM SYSTEM CONTROL ALARM SYSTEM CONTROL USING LCD KEYPAD 1.0.1 SECURITY MENU... - Page 4 AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 2: HOME AUTOMATION CONTROL INTRODUCTION 2.1 AUTOMATION CONTROL USING LCD KEYPAD 2.1.1 QUICK AUTOMATION CONTROL 2.1.2 QUICK VIEW OF OUTPUT DESCRIPTION 2.1.3 QUICK VIEW OF OUTPUT STATUS CHAPTER 3: USER PROGRAMMING USER SETTING EDIT 3.0.1...
- Page 5 AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 6: WHEN THERE IS AN EMERGENCY EMERGENCY ALARM DURESS ALARM (CALLING FOR HELP) TELEPHONE ALERT TO USER 6.2.1 SYSTEM CALL-OUT WITH VOICE INTERFACE 6.2.2 SYSTEM CALL-OUT WITH BEEPER INTERFACE CHAPTER 7: SYSTEM CHECKING TROUBLE 7.0.1...
- Page 6 AX1 LCD & ICON User Manual Rev 4.0 1.0.3 ALARM REPORT 1.0.4 CLEAR ALARM MEMORY 1.0.5 BYPASSING ZONE 1.0.5.1 QUICK BYPASSING ZONE CHAPTER 2: HOME AUTOMATION CONTROL INTRODUCTION AUTOMATION CONTROL USING ICON KEYPAD CHAPTER 3: VIEW TIMER MODE CHAPTER 4: USER PROGRAMMING USER SETTING EDIT 4.0.1...
- Page 7 AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 6: SECURITY & AUTOMATION CONTROL THROUGH TELEPHONE SYSTEM CONTROL THROUGH TELEPHONE SYSTEM CONTROL WITH VOICE INTERFACE THROUGH CALL-IN SYSTEM CONTROL WITH BEEPER INTERFACE THROUGH CALL-IN CHAPTER 7: WHEN THERE IS AN EMERGENCY...
-
Page 8: Preface
Thank you for selecting the new AX1 Security and Home Automation system. This manual will explain to you on how to operate your AX1 security and home automation system. This system is made up of a control panel, keypads, integrated switch module and telephone voice module. -
Page 9: Features
AX1 LCD & ICON User Manual Rev 4.0 FEATURES AX1 LCD 8 fully programmable zones (expandable to 32 zones) Expandable up to 32 output controls (with feedback capability) Supports up to 8 LCD keypads 4 Real time ARM/DISARM timer on Daily basis or Schedule basic. - Page 10 23. Programmable event trigger 24. Fast Key on Keypad for Easy menu access 25. Duress code 26. Walk test function 27. Double Call-in Feature for Fax Machine telephone line sharing 28. Support AX1 GSM 29. Support AX1 Web Server Module (WSM)
-
Page 11: Ax1 Lcd User Manual
AX1 LCD & ICON User Manual Rev 4.0 LCD KEYPAD USER MANUAL... -
Page 12: Lcd Keypad Outlook
AX1 LCD & ICON User Manual Rev 4.0 LCD KEYPAD OUTLOOK POWER: ARMED: TROUBLE: ALARM: AC Power light System arm light System trouble light System Alarmed Avantis 15 16 21 22 29 30 Key Indication Zone Indicator / IO Indicator... -
Page 13: Arming Mode
AX1 LCD & ICON User Manual Rev 4.0 ARMING MODE ARMING ZONE WHEN TO INFORMATION TYPE STATUS Auto home Normal Status To arm the system with delay time in When user Arming order for the user to exit the house... -
Page 14: Sound Indication
AX1 LCD & ICON User Manual Rev 4.0 SOUND INDICATION Sound Indication Description Acceptance / Acknowledgement tone 2 fast beeps Error tone Continuous buzz for about 2 seconds Entry delay Continuous beep for the delay programmed by installer. Exit delay Continuous beep for the delay programmed by installer. -
Page 15: Overall Lcd Keypad Menu Tree
AX1 LCD & ICON User Manual Rev 4.0 LCD Keypad Overall Menu Tree AUTO HOME PARTITION PARTITION 1 PARTITION 2 PARTITION 3 PARTITION 4 DAY PARTITION PARTITION 1 … PARTITION 4 NIGHT PARTITION ... - Page 16 AX1 LCD & ICON User Manual Rev 4.0 SYSTEM KEYPAD SETTING KEYPAD B/LIGHT ENABLE / DISABLE LCD B/LIGHT ENABLE / DISABLE CHIME ENABLE / DISABLE KEYPRESS TONE ENABLE / DISABLE PRE-WARN TONE ENABLE / DISABLE KEYPAD TAMPER ...
- Page 17 AX1 LCD & ICON User Manual Rev 4.0 OUTPUT TIMER ON TIMER SELECT TIMER – TMR1 to TMR4 DAILY SCHEDULED OFF TIMER SELECT TIMER – TMR1 to TMR4 DAILY SCHEDULED o DATE & TIME ...
-
Page 18: Chapter 1: Alarm System Control
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 1: ALARM SYSTEM CONTROL ALARM SYSTEM CONTROL USING LCD KEYPAD 1.0.1 SECURITY MENU Security menu is a menu that able user to toogle Arm or Disarm by press the partition number. This menu will show system arming status on the upper line and keypress description on the bottom line. - Page 19 AX1 LCD & ICON User Manual Rev 4.0 1.0.1.1 ARM / DISARM ALL PARTITION When [All partition authorized PIN] is use to enter security menu, user will be able to press [0] to arm / disarm all partition. The control condition is shown in table below:...
- Page 20 AX1 LCD & ICON User Manual Rev 4.0 Alarm system Control Sub-Menu 1.0.2 ARM AUTO HOME o ALL o PARTITION PARTITION 1 PARTITION 2 PARTITION 3 PARTITION 4 DAY o ALL o PARTITION PARTITION 1 ...
-
Page 21: Arming
AX1 LCD & ICON User Manual Rev 4.0 1.0.2 ARMING 01 - 01 – 2010 Mon 12 : 00 Press [User PIN] [*] to enter user menu ARM DISARM Press [#] to ARM AUTO HOME REQUEST REJECTED Press [▲] or [▼]... -
Page 22: Disarming
AX1 LCD & ICON User Manual Rev 4.0 1.0.3 DISARMING 01 - 01 – 2010 Mon 12 : 00 Press [User PIN] [*] to enter user menu DISARM Press [#] to DISARM ALL PARTITION Press [▼] or [▲] If „ALL‟... -
Page 23: Clear Alarm Memory
AX1 LCD & ICON User Manual Rev 4.0 1.0.5 CLEAR ALARM MEMORY When alarm occurs, the strobe lights and the bells will be turned on. If the system is disarmed, it could only turn off the bell but not the strobe light. Thus, the user needs to clear the alarm memory to turn off the strobe light. -
Page 24: Bypassing Zone
AX1 LCD & ICON User Manual Rev 4.0 1.0.6 BYPASSING ZONE Bypassing a zone means removal of one or more protection zones from the system. In order to perform bypassing, the system must be in normal mode. Once the system is disarmed, all the zone will be unbypassed. -
Page 25: Zone Status Viewing
AX1 LCD & ICON User Manual Rev 4.0 1.0.7 ZONE STATUS VIEWING 01 - 01 – 2010 Mon 12 : 00 Press [MASTER PIN] [*] to enter master menu AUTOMATION SYSTEM Press [▼] or [▲] to choose „SYSTEM‟ from main menu... -
Page 26: Ax1 Lcd & Icon User Manual Rev
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 2: HOME AUTOMATION CONTROL INTRODUCTION The system can support up to 32 outputs. The outputs can be electrical appliances such as air- conditioners, fans or lights. The outputs can be configured as event-triggered outputs or normal outputs which are controlled either by LCD keypad, real time clock timer or telephone remote control. -
Page 27: Automation Control Using Lcd Keypad
AX1 LCD & ICON User Manual Rev 4.0 AUTOMATION CONTROL USING LCD KEYPAD 01 - 01 – 2010 Mon 12 : 00 Press [User PIN] [*] to enter user menu AUTOMATION SYSTEM Press [▼] or [▲] to choose „AUTOMATION‟ from main menu Press [#] to select. -
Page 28: Chapter 3: User Programming
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 3: USER PROGRAMMING USER SETTING EDIT Only the user who has the Master PIN can access the user-programming mode. Once the user goes into user programming mode, user can access to the following options:... -
Page 29: Master User
AX1 LCD & ICON User Manual Rev 4.0 3.0.1 MASTER USER 01 - 01 – 2010 Mon 12 : 00 Press [Master PIN] [ to enter user menu USER PROGRAM Press [▼] or [▲] to choose „USER PROGRAM‟ from... -
Page 30: User
AX1 LCD & ICON User Manual Rev 4.0 3.0.2 USER MASTER USER Press [ ▲ ] or [ ▼ ] to choose „USER‟ from user program menu Press [#] to select ADD NEW USER DELETE USER If „ADD NEW USER‟... -
Page 31: Guest
AX1 LCD & ICON User Manual Rev 4.0 3.0.3 GUEST GUEST INSTALLER Press [ ▲ ] or [ ▼ ] to choose „GUEST‟ from user program menu Press [#] to select ADD NEW GUEST DELETE GUEST If „ADD NEW GUEST‟... -
Page 32: Installer Access
AX1 LCD & ICON User Manual Rev 4.0 3.0.4 INSTALLER ACCESS GUEST INSTALLER Press [ ▲ ] or [ ▼ ] to choose „INSTALLER‟ from user program menu Press [#] to select INSTALLER ACCESS - ENABLE Press [ ▲ ] or [ ▼ ]... -
Page 33: Timer
AX1 LCD & ICON User Manual Rev 4.0 3.0.5 TIMER TIMER DURESS Press [▼] or [▲] to choose „TIMER‟ from user program menu Press [#] to select ZONE TIMER OUTPUT TIMER If ZONE TIMER If OUTPUT TIMER If DATE & TIME... -
Page 34: Duress
AX1 LCD & ICON User Manual Rev 4.0 3.0.6 DURESS TIMER DURESS Press [▼] or [▲] to choose „DURESS‟ from user program menu Press [#] to select ENTER NEW PIN: Press [4 digits PIN] [#] RE-ENTER PIN: Re-enter the PIN... -
Page 35: Chapter 4: Keypad Settings
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 4: KEYPAD SETTINGS COMMAND INFORMATION Door Chime This options will toggle the door chime to Enable/ Disable Keypad Back Light This options will toggle the keypad back light to Enable/ Disable... -
Page 36: Phone Line Loss Detection
AX1 LCD & ICON User Manual Rev 4.0 PHONE LINE LOSS DETECTION 01 - 01 – 2010 Mon 12 : 00 Press [User PIN] [*] to enter user menu AUTOMATION SYSTEM Press [▼] or [▲] to choose „SYSTEM‟ from main menu Press [#] to select ... -
Page 37: Chapter 5: Security & Automation Control Through Telephone
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 5: SECURITY & AUTOMATION CONTROL THROUGH TELEPHONE SYSTEM CONTROL THROUGH TELEPHONE User also can control the alarm system and the home automation through the telephone. For system control by using telephone, there are two types of system interface. One is with voice guided interface (Main board with voice module) and secondly is with beepers guided interface (Main Board without voice module). -
Page 38: System Control With Beeper Interface Through Call-In
AX1 LCD & ICON User Manual Rev 4.0 SYSTEM CONTROL WITH BEEPER INTERFACE THROUGH CALL-IN Call In System answer call after pre-set RING NUM 5 Slow Tones Press [Master Pin] [#] within 1 minutes Acknowledgment Tone (Beep Twice) Valid code/... -
Page 39: Chapter 6: When There Is An Emergency
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 6: WHEN THERE IS AN EMERGENCY EMERGENCY ALARM In order to access this function, the system must be in normal mode COMMAND INFORMATION If there is a „FIRE‟ Alarm will be triggered ... -
Page 40: System Call-Out With Voice Interface
AX1 LCD & ICON User Manual Rev 4.0 6.2.1 SYSTEM CALL-OUT WITH VOICE INTERFACE Call Out Answer the Call Continuous Slow beep Press any key for Press Acknowledge system 1 for Security Menu; 2 for System Status; Attention! 3 for Siren Control;... -
Page 41: System Call-Out With Beeper Interface
AX1 LCD & ICON User Manual Rev 4.0 6.2.2 SYSTEM CALL-OUT WITH BEEPER INTERFACE Call Out Answer theCall Continuous Slow beep Press any key Continuous tone for Alarm; Event Tone 4 beep tone for ARM/DISARM/ZONE RESTORE/TROUBLE (if reporting is enable) -
Page 42: Chapter 7: System Checking
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 7: SYSTEM CHECKING TROUBLE TROUBLE CAUSES DC Loss (Low Battery) The Backup battery is weak or the backup battery not connected Either bell, Strobe or Siren is loss. Bell Strobe Siren Loss Unable to call out either due to no reply by user during reporting. -
Page 43: Testing System By Using Keypad
AX1 LCD & ICON User Manual Rev 4.0 TESTING SYSTEM BY USING KEYPAD Users are advised to test the system frequently. System must be tested at least once every three months. If the system is not functioning accordingly, please contact the nearest dealer for technical assistance. -
Page 44: Event Log Viewing
Upon overflow of 1000 events, the latest event (event 1001) will replace the 1st event in the memory. The event log‟s data in AX1 main panel is inerasable due to security constraint. Master User is able to retrieve the full range of Event Log data by access to menu “EVENT LOG”... -
Page 45: The Event Log Display Format
AX1 LCD & ICON User Manual Rev 4.0 7.2.1 Event Log Display Format The event description contains data displayed in the following format : DD - MM- YY HH:MM EVENT NAME & IDEN Date (01-31) : Hour (00-23) Month (01-12) -
Page 46: Ax1 Icon User Manual
AX1 LCD & ICON User Manual Rev 4.0 ICON KEYPAD USER MANUAL... -
Page 47: Icon Keypad Outlook
AX1 LCD & ICON User Manual Rev 4.0 ICON KEYPAD OUTLOOK Key Indication Auto-Home Arming Day Arming Night Arming Testing Mode Force Arming Home Automation Clear Alarm Memory Keypad Settings Door Chime on/off View Trouble Zone Bypass Mode View Timer Mode... -
Page 48: Arming Mode
AX1 LCD & ICON User Manual Rev 4.0 ARMING MODE ARMING ZONE WHEN TO INFORMATION TYPE STATUS Auto home Normal Status To arm the system with delay time in When user Arming order for the user to exit the house... -
Page 49: Sound Indication
AX1 LCD & ICON User Manual Rev 4.0 SOUND INDICATION Sound Indication Description Acceptance / Acknowledgement tone 2 fast beeps Error tone Continuous buzz for about 2 seconds Entry delay Continuous beep for the delay programmed by installer. Exit delay Continuous beep for the delay programmed by installer. -
Page 50: Chapter 1: Alarm System Control
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 1: ALARM SYSTEM CONTROL ALARM SYSTEM CONTROL USING ICON KEYPAD 1.0.1 ARMING Press [User Press [User Press [User Press [User PIN] and # PIN] and hold PIN] and hold PIN] and hold [ ] for 2 sec. -
Page 51: Disarming
AX1 LCD & ICON User Manual Rev 4.0 1.0.2 DISARMING 1.0.2.1 IN ARMED MODE Press [User PIN] [#] to disarm System is now disarmed 1.0.2.2 IN ALARM MODE Press [User PIN] [#] to disarm System is now disarmed... -
Page 52: Alarm Report
AX1 LCD & ICON User Manual Rev 4.0 1.0.3 ALARM REPORT When alarm occurs, the strobe lights and the bells will be turned on. If the system is disarmed, it could only turn off the bell but not the strobe light. Screen will be displayed as below based on the arming type. -
Page 53: Bypassing Zone
AX1 LCD & ICON User Manual Rev 4.0 1.0.5 BYPASSING ZONE Bypassing a zone means removal of one or more protection zones from the system. In order to perform bypassing, the system must be in normal mode. Once the system is disarmed, the entire zone will be unbypassed. -
Page 54: Chapter 2: Home Automation Control
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 2: HOME AUTOMATION CONTROL INTRODUCTION The system can support up to 8 outputs and can be controlled during system in normal and armed state only. The outputs can be electrical appliances such as air-conditioners, fans or lights. -
Page 55: Automation Control Using Icon Keypad
AX1 LCD & ICON User Manual Rev 4.0 AUTOMATION CONTROL USING ICON KEYPAD Press and hold for 2 sec Screen will show the current output status. Press the relevant module number (1 to 8) to toggle output Black dots turn ON to indicate Press [0] to get into ON/OFF outputs are on. -
Page 56: Chapter 3: View Timer Mode
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 3: VIEW TIMER MODE This feature enable user to view the timer that has been set earlier for Home Automation ON/ OFF and also Auto ARM/ DISARM Press and hold for 2 sec... -
Page 57: Chapter 4: User Programming
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 4: USER PROGRAMMING Only user who has Master PIN can access to user programming mode. If there‟s any mistake made while programming or if the control panel rejects the command, keypad will sound an error tone and user has to re-enter the command again. - Page 58 AX1 LCD & ICON User Manual Rev 4.0 Edit Auto Arm Timer This feature enable user to set timer to auto Arm the system. Time set must be in a 12 hour format. Edit Auto Disarm Timer This feature enable user to set timer to auto Disarm the system.
-
Page 59: User Setting Edit
AX1 LCD & ICON User Manual Rev 4.0 USER SETTING EDIT 4.0.1 MASTER USER Press 4 to 6 digit Press [#] to confirm. [MASTER PIN][COM][#] to enter user programming menu. Press 4 to 6 digit master PIN again. “2” at the right... -
Page 60: User
AX1 LCD & ICON User Manual Rev 4.0 4.0.2 USER Press 4 to 6 digit new user PIN. “1” at the right upper corner indicate new Press 4 to 6 digit [MASTER PIN enter PIN][COM][#] to enter user programming menu. -
Page 61: Guest
AX1 LCD & ICON User Manual Rev 4.0 4.0.3 GUEST Press 4 to 6 digit new guest PIN. “1” at the right upper corner indicate new PIN enter Press [#] to confirm. Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. -
Page 62: Duress
AX1 LCD & ICON User Manual Rev 4.0 4.0.4 DURESS Press 4 to 6 digit [MASTER Press 4 digit new PIN][COM][#] to enter user duress code programming menu. Press [#] to confirm. Press to enter duress code edit submenu. Press to exit Press [#] to confirm. -
Page 63: Timer
AX1 LCD & ICON User Manual Rev 4.0 4.0.5 TIMER 4.0.5.1 IO ON Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press desired IO ON time. Then press [#] to confirm. Press to enter IO ON timer edit submenu. -
Page 64: Io Off
AX1 LCD & ICON User Manual Rev 4.0 4.0.5.2 IO OFF Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press desired IO OFF time. Then press [#] to confirm. Press to enter IO OFF timer edit submenu. -
Page 65: Arm
AX1 LCD & ICON User Manual Rev 4.0 4.0.5.3 ARM Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press desired ARM time. Then press [#] to confirm. Press to select Press to enter ARM the AM/PM. -
Page 66: Disarm
AX1 LCD & ICON User Manual Rev 4.0 4.0.5.4 DISARM Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press the desired DISARM time. Then press [#] to confirm. Press to enter Press to select DISARM timer edit the AM/PM. -
Page 67: Clock
AX1 LCD & ICON User Manual Rev 4.0 4.0.6 CLOCK Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press to enter CLOCK edit submenu. Press [#] to confirm. Press desired time. Then press [#] to confirm. -
Page 68: Installer Access
AX1 LCD & ICON User Manual Rev 4.0 4.0.7 INSTALLER ACCESS Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press to enter Installer Access submenu. Press key [1] to toggle the ON/OFF [Enble/ Disable] of installer access. -
Page 69: Fast Key Access
AX1 LCD & ICON User Manual Rev 4.0 4.0.8 FAST KEY ACCESS Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press to enter Fast Key Access submenu. Press key [1] to toggle the ON/OFF [Enble/ Disable] of fast key access. -
Page 70: Phone Line Loss Detection
AX1 LCD & ICON User Manual Rev 4.0 4.0.9 PHONE LINE LOSS DETECTION Press 4 to 6 digit [MASTER PIN] [COM] [#] to enter user programming menu. Press to selec Phone line Loss Detection submenu and press [ # ] Press key [1] to toggle the ON/OFF [Enable/ Disable] of Phone line Loss Detection. -
Page 71: Pc Comm
AX1 LCD & ICON User Manual Rev 4.0 4.0.10 PC COMM Press 4 to 6 digit [MASTER PIN][COM][#] to enter user programming menu. Press to enter PC COM submenu. Press key [1] to toggle the ON/OFF [Enable/Disable] of PC communication. -
Page 72: Chapter 5: Keypad Settings
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 5: KEYPAD SETTINGS Command Information Door Chime This options will toggle the door chime to ON/OFF Keypad Back Light This options will toggle the keypad back light to ON/OFF Arm Tone... -
Page 73: Keypad Setting View
AX1 LCD & ICON User Manual Rev 4.0 KEYPAD SETTING VIEW Press and hold for 2 sec. Press key [2] Press key [3] Press key Press key to go into “A to go into [1] to go [4] to go TONE”... -
Page 74: Chapter 6: Security & Automation Control Through Telephone
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 6: SECURITY & AUTOMATION CONTROL THROUGH TELEPHONE SYSTEM CONTROL THROUGH TELEPHONE User also can control the alarm system and the home automation through the telephone. For system control by using telephone, there are two types of system interface. One is with voice guided interface (Main board with voice module) and secondly is with beepers guided interface (Main Board without voice module). -
Page 75: System Control With Beeper Interface Through Call-In
AX1 LCD & ICON User Manual Rev 4.0 SYSTEM CONTROL WITH BEEPER INTERFACE THROUGH CALL-IN Call In System answer call after pre-set RING NUM 5 Slow Tones Press [Master Pin] [#] within 1 minutes Acknowledgment Tone (Beep Twice) Valid code/... -
Page 76: Chapter 7: When There Is An Emergency
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 7: WHEN THERE IS AN EMERGENCY EMERGENCY ALARM In order to access this function, the system must be in normal mode Command Information If there is a „FIRE‟ Alarm will be triggered... -
Page 77: Duress Alarm (Calling For Help)
AX1 LCD & ICON User Manual Rev 4.0 DURESS ALARM (CALLING FOR HELP) In the event where the user is forced by an intruder or robber to disarm the alarm system, user can disarm the alarm system by using Duress Code. By pressing Duress Code, user can access the menu to disarm the system. -
Page 78: Telephone Alert To User
AX1 LCD & ICON User Manual Rev 4.0 TELEPHONE ALERT TO USER In case of any intrusion or emergency, this system will acknowledge users with an alarm report. The panel will contact the user through fixed telephone or mobile line. If the user is unable to reply the phone call, this system will call the user again. -
Page 79: System Call-Out With Voice Interface
AX1 LCD & ICON User Manual Rev 4.0 7.3.1 SYSTEM CALL OUT WITH VOICE INTERFACE Call Out Press Answer the Call 1 for Security Menu; 2 for System Status; Continuous 3 for Siren Control; Slow beep 4 for Zone Bypass & Restore Menu;... -
Page 80: System Call-Out With Beeper Interface
AX1 LCD & ICON User Manual Rev 4.0 7.3.2 SYSTEM CALL OUT WITH BEEPER INTERFACE Call Out Answer theCall Continuous Slow beep Press any key Continuous tone for Alarm; Event Tone 4 beep tone for ARM/DISARM/ZONE RESTORE/TROUBLE (if reporting is enable) -
Page 81: Chapter 8: System Checking
AX1 LCD & ICON User Manual Rev 4.0 CHAPTER 8: SYSTEM CHECKING TROUBLE VIEW System must be in normal or armed mode in order to view trouble. Control panel will monitor a number of possible trouble conditions. If any of the conditions occur, The “TROUBLE”... - Page 82 AX1 LCD & ICON User Manual Rev 4.0 If there is no trouble occurred. Press key [1] to view low battery trouble. Press key [2] to view bell/ strobe/ siren loss trouble. Press key [3] to view external communication failure trouble.
-
Page 83: Testing System
AX1 LCD & ICON User Manual Rev 4.0 TESTING SYSTEM Users are advised to test the system frequently. System must be tested at least once every three months. If the system is not functioning accordingly, please contact the nearest dealer for technical assistance. -
Page 84: Quick Trouble View
AX1 LCD & ICON User Manual Rev 4.0 Press [USER PIN] and hold for 2 sec. Press to select submenus. Press [#] to Press [#] to start Press [#] to start Press [#] to start confirm. the test. the test. -
Page 85: Appendix A
Double Call Feature If the AX1 system is connected to the same phone line with a fax machine, an issue of who will be picking-up the line first wills occure. This is due to the fax machine also has its own preprogrammed ringing count to be operated. -
Page 86: Glossary
Bypass Removal of one or more protection zones from the system Central Monitoring Station Central control station to receive the alarm message from AX1 system Chime A beeping tune from the keypad to indicate sensor is activated Duress Code... -
Page 87: Limitations
The Double Call means user need call for the first time and hang up after 2 ring count then call again the second time and the AX1 system will pick up the call. -
Page 88: System Information
AX1 LCD & ICON User Manual Rev 4.0 SYSTEM INFORMATION MASTER USER: ADDRESS: TELEPHONE NUMBER: DATE : REMARKS : Telephone Number 1 Receiver Number 1 Receiver Type User / CMS Receiver Option Permanent / Backup CMS Account Number 1 Telephone Number 2... - Page 89 AX1 LCD & ICON User Manual Rev 4.0 Zone Settings Zone Output Zone Partition Zone Type Description Chime 1 / 2 / 3 / 4 Light/Interior/Instant/Delay/24 Hours Yes/No 1 / 2 / 3 / 4 Light/Interior/Instant/Delay/24 Hours Yes/No 1 / 2 / 3 / 4...
- Page 90 AX1 LCD & ICON User Manual Rev 4.0 Output Settings Output Output Description...
- Page 91 AX1 LCD & ICON User Manual Rev 4.0 Output Timers Timer Daily or Scheduled Timer ON Timer OFF Output No. Timer 1 Daily / Scheduled Date: Date: Time: Time: Timer 2 Daily / Scheduled Date: Date: Time: Time: Timer 3 Daily / Scheduled...
-
Page 92: Ax1 Lcd Quick Reference
AX1 LCD & ICON User Manual Rev 4.0 AX1 LCD QUICK REFERENCE 1) To arm the Alarm system & other Fast Key Functions Key press Option Remark 1 and hold 2s Auto Home Arming mode When you leave the house... -
Page 93: History Of Version Update
If arming Automation System accepted, Menu Status keypad shows: Press Zone 1 AX1 LCD & ICON User Manual Rev 4.0 1 to ON Violated Output Zone 7 2 to OFF Violated Output Emergency History of Version Updates ………… 3 to ON ALL...