Timer; Io On - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual

4.0.5 TIMER

4.0.5.1 IO ON

Press 4 to 6 digit [MASTER
PIN][COM][#] to enter user
programming menu.
Press to enter IO ON
timer edit submenu.
Press [#] to confirm.
Press key [1 to 4] to select number
of timer. Example key [2] for
timer 2.
Press [#] to confirm.
Note:
Only 12 hour format time can be entered.
e.g. 04:59  accepted 12:00  accepted
04:69 rejected
Initially "--:--"will be shown, once first number is pressed, it will appear on the left most position and the other 3
positions will be displayed as dashes. e.g. "2 -:--"
Unacceptable numbers will result in an error tone and display will show "--:--".
Wrong entered number can be erased by pressing [*] and display will return back to "--:--".
After enter the time, "AMPM" will appear but "AM" will start flashing. The one selected will be flashing.
while in "AM" is flashing or pressing
Pressing
The IO ON setting time can be view from "View Timer Mode" (refer section chapter 3)
Press desired IO ON time.
Then press [#] to confirm.
13:00  rejected
Press to select the
AM/PM.
Press [#] to confirm.
Press [ 0] [#]
to delete timer.
Press to exit
while "PM" is flashing will result in error tone.
Rev 4.0
56