AX1 LCD & ICON User Manual
1.0.5 BYPASSING ZONE
Bypassing a zone means removal of one or more protection zones from the system. In order
to perform bypassing, the system must be in normal mode. Once the system is disarmed, the
entire zone will be unbypassed.
1.0.5.1 QUICK BYPASSING ZONE
Command
Press and hold
for 2 seconds
Press and Hold
for 2 sec.
Screen will show the current
bypassed zone status. Black dots
turn ON to indicate zones are
bypassed.
To toggle ON/ OFF, press
relevant zone number (1-8).
Press
to return back to
normal mode.
Information
Bypassing zone
Rev 4.0
46