AX1 LCD & ICON User Manual
1.0.6 BYPASSING ZONE
Bypassing a zone means removal of one or more protection zones from the system. In order to
perform bypassing, the system must be in normal mode. Once the system is disarmed, all the zone
will be unbypassed.
1.0.6.1 QUICK VIEW ON BYPASS DESCRIPTION
Once at desired zone in ZONE STATUS menu, press "0" to view the zone description that have
been predetermine during installation using the voice setting.
1.0.6.2 QUICK BYPASSING ZONE
COMMAND
Press and hold the button [9] for 2 seconds
Bypass zones are cleared after system is disarmed.
It can be done by pressing [#] in bypass menu until the ACTIVE status is shown.
01 - 01 – 2010 Mon
12 : 00
Press [User PIN] [*]
to enter user menu
CLEAR ALARM
BYPASS
Press [▼] or [▲]
to choose „BYPASS‟
from main menu
Press [#] to select
ZONE 1
- ACTIVE
Press [#] to toggle the
current zone status from
active to bypassed
ZONE 1
- BYPASS
Press [▼] or [▲]
to choose next zone.
Press [*] to return to
main menu
ZONE 2
- ACTIVE
INFORMATION
Bypassing zone
Rev 4.0
17