AX1 LCD & ICON User Manual
2.1
AUTOMATION CONTROL USING ICON KEYPAD
Press
Screen will show the current
output status.
Press the relevant module number (1
to 8) to toggle output
Black dots turn ON to indicate
outputs are on.
Press
to return back to
normal mode.
Note:
When "ALL ON" is displayed, press the
button to view "ALL ON" again.
Press the
while display shows "ALL ON" or pressing
Pressing
If system does not connect to any output, indicator light will show "ON" (black dot).
and hold for 2 sec
Press [0] to get into ON/OFF
all outputs menu.
Press
turn ON all or turn OFF all.
Press [#] to select.
button to select "ALL OFF".
while display shows "ALL OFF" will result in error tone.
to select either to
Press [#] to select.
Rev 4.0
48