Chapter 3: View Timer Mode - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual
This feature enable user to view the timer that has been set earlier for Home Automation ON/
OFF and also Auto ARM/ DISARM
IF "ZONE"
blinking, press
[#] to view
Auto ARM/
DISARM timer
If timer was
not set,
12.00 will be
AM
display
Screen will alternate between ON Timer
and OFF Timer Display.
Press
Note:
while in "ZONE" is flashing or pressing
Pressing
Timer will be displayed in a 12 hour format. If timer was not set, 12.00
For Home Automation ON/ OFF timer, IO output status can only be shown after the intaller setting (refer installer
manual: command [80] – Timer Trigger I/O Module Output)

CHAPTER 3: VIEW TIMER MODE

Press and hold for 2 sec
IF "ZONE"
blinking, press [#]
to view Auto
ARM/ DISARM
timer
If timer was set,
correspond time will
be display
Press
Press to view Home Automation ON/
OFF timer
Press the relevant module number
(1 to 4) to select timer
Press [#] to confirm
If timer was set,
correspond time
will be display
Screen will alternate between ON
Timer and OFF Timer Display. Black
dots turn on to indicate which IO
output will be ON/OFF on setting
time.
to exit
while icon is flashing will result in error tone.
will be display.
AM
Rev 4.0
Press to go back previous
sub-menu
If timer was not
set, 12.00 will
AM
be display
49