AX1 LED User Manual Rev 1.0 CONTENTS PREFACE FEATURES LED KEYPAD OUTLOOK LIGHT INDICATION CHAPTER 1: ALARM SYSTEM CONTROL USING LED KEYPAD 1.0.1 ARMING 1.0.1.1 QUICK ARMING 1.0.2 DISARMING 1.0.2.1 IN ARMED MODE 1.0.2.2 IN ALARM MODE 1.0.3 ALARM REPORT 1.0.4...
Page 4
AX1 LED User Manual Rev 1.0 HOME AUTOMATION CONTROL USING TELEPHONE 2.2.1 WITH VOICE ACTIVE 2.2.2 WITH BEEPER CHAPTER 3: VIEW TIMER MODE CHAPTER 4: USER PROGRAMMING PIN CODE EDIT 4.0.1 MASTER USER 4.0.2 USER 4.0.3 GUEST 4.0.4 DURESS 4.0.5 TIMER 4.0.5.1 IO ON...
Page 5
AX1 LED User Manual Rev 1.0 CHAPTER 6: WHEN THERE IS AN EMERGENCY EMERGENCY ALARM DURESS ALARM (CALLING FOR HELP) TAMPER LOSS AND PHONE LINE LOSS ALARM SYSTEM ALERT TO USER THROUGH TELEPHONE 6.3.1 WITH VOICE ACTIVE 6.3.2 WITH BEEPER...
AX1 LED User Manual Rev 1.0 PREFACE Thank you for selecting the new AX1 system. This manual will explain to you on how to operate your AX1 alarm and home automation system. This system is made up of a control panel, keypads, integrated switch module and telephone voice module.
AX1 LED User Manual Rev 1.0 FEATURES AX1 LED 8 fully programmable zones Expandable up to 8 output controls (with feedback capability) Supports up to 4 LED keypads 1 Real time ARM/DISARM timer on Daily Basis only. 4 Real time ON/OFF timer on daily basis 7 user codes &...
Page 8
AX1 LED User Manual Rev 1.0 33. Fast Key on Keypad for Easy menu access 34. Duress code 35. Walk test function 36. Double Call-in Feature for Fax Machine telephone line sharing 37. 16 Event Trigger Outputs with programmable countdown timer...
LED KEYPAD OUTLOOK SYSTEM STATUS INDICATORS Power – Green Armed – Red Service – Yellow ZONE STATUS INDICATORS KEYPAD ACCESS Key Indication Auto-Home Arming / Day Arming / Keypad Night Arming / View Fire Testing Setting Timer Force Arming Home Automation Clear Alarm Memory Emergency Door Chime on/off...
Page 10
AX1 LED User Manual Rev 1.0 ARMING MODE Arming Type Zone Status Information When To Use To arm the system with delay time in When user order for the user to exit the house leaves the house Auto home Normal Status...
Walk test Flash Flash Pending AX1 LED Keypad Display’s Reference Table NOTE: : When AC power ON, LED is ON; When AC power failure, LED is OFF : When armed, LED = ON When Emergency/Fire/Panic, LED = Flash When disarmed, LED = OFF : When trouble occurs, LED is ON;...
AX1 LED User Manual Rev 1.0 [CHAPTER 1] ALARM SYSTEM CONTROL USING LED KEYPAD 1.0.1 ARMING Press [User Press [User Press [User Press [User PIN] and # PIN] and hold PIN] and hold PIN] and hold [ ] for 2 sec.
AX1 LED User Manual Rev 1.0 1.0.2 DISARMING 1.0.2.1 IN ARMED/ALARM MODE Command Information To disarm the system, press The keypad will beep twice upon [User PIN] [#]. confirmation. Otherwise, the error tone will sound if PIN numbers are entered wrongly.
AX1 LED User Manual Rev 1.0 1.0.3 ALARM REPORT When alarm occurs, the strobe lights and the bells will be turned ON. If the system is , it could only turn OFF the bell but not the strobe light. Zone LED fast flashes disarmed indicate that the designated zone has been triggered by alarm.
AX1 LED User Manual Rev 1.0 1.0.5 BYPASSING ZONE Bypassing a zone means removal of one or more protection zones from the system. In order to perform bypassing, the system must be in . Once the system is disarmed, the normal mode entire zone will be unbypassed.
Arming Menu Press 1 to arm Partition 1 # for Main Menu If wrong input key 0 to Exit Invalid Input * AX1 LED only support Press [0] Press [#] partition 1 Press [1] Arming Mode Menu If arming accepted,...
AX1 LED User Manual Rev 1.0 1.1.2 ARM/DISARM WITH BEEPER (Without voice module) 5 Slow Tones Press [Master PIN] [#] within 1 minute Invalid Code Correct Code Error Tone Acknowledgement Tone (Beep Twice) (Long Beep) Only 3 attempts allowed. To arm the system with Auto Home Arming,...
AX1 LED User Manual Rev 1.0 CHAPTER 2: HOME AUTOMATION CONTROL INTRODUCTION The system can support up to 8 outputs and can be controlled during system in normal and armed state only. The outputs can be electrical appliances such as air-conditioners, fans or lights.
AX1 LED User Manual Rev 1.0 HOME AUTOMATION CONTROL USING LED KEYPAD Press and hold for 2 sec Zone LED will show the current output status. Press the relevant module number (1 to 8) to toggle output Press [ 0 ] to ON all outputs Zone LED turn ON to indicate outputs are on.
AX1 LED User Manual Rev 1.0 HOME AUTOMATION CONTROL USING TELEPHONE For home automation control by using telephone, there are two methods. One is using voice guided if voice module is installed into the system and secondly is guided by beepers.
AX1 LED User Manual Rev 1.0 2.2.2 WITH BEEPER (Without Voice Module) 5 Slow Tones Press [Master PIN] [#] within 1 minute Incorrect Code Correct Code Acknowledgement Error Tone Tone (Beep Twice) (Long Beep) To turn ON the output. Press [4] [Output Number] [#] To turn OFF the output.
AX1 LED User Manual Rev 1.0 CHAPTER 3: VIEW TIMER MODE This feature enable user to view the timer that has been set earlier for Home Automation ON/OFF and also Auto ARM/ DISARM. Command Information Press [COM] [3] [1] [#] [1 – 4] [#] ...
AX1 LED User Manual Rev 1.0 CHAPTER 4: USER PROGRAMMING Only user who has Master PIN can access to user programming mode. If there‟s any mistake made while programming or if the control panel rejects the command, keypad will sound an error tone and user has to re-enter the command again.
Page 24
AX1 LED User Manual Rev 1.0 Installer access will be disabling automatically every 3 hours. Fast Key Access Enabling or disabling the fast key access. Phone line loss detection Enabling or disabling the phone line loss detection.
AX1 LED User Manual Rev 1.0 PIN CODE EDIT 4.0.1 MASTER USER Command Information Zone 1 light will be ON to indicate that the Step 1: Press [1] [#] command has been accepted and the users are in “Edit User’s PIN” option.
AX1 LED User Manual Rev 1.0 4.0.3 GUEST Command Information Zone 1 light will be ON to indicate that the Step 1: Press [1] [#] command has been accepted and the users are in “Edit User’s PIN” option. User 8 = Guest user Step 2: Enter the user number : [8] [#] Step 3: Press the new PIN : [4 - 6 digits PIN] [#] ...
AX1 LED User Manual Rev 1.0 4.0.5 TIMER 4.0.5.1 IO ON Command Information Zone 1 light will be ON to indicate that the Step 1: Press [3] [#] command has been accepted and the users are in “Edit IO ON Timer” option.
AX1 LED User Manual Rev 1.0 4.0.5.3 ARM Command Information Zone 1 light will be ON to indicate that the Step 1: Press [6] [#] command has been accepted and the users are in “Edit Auto Arm Timer” option.
AX1 LED User Manual Rev 1.0 4.0.7 INSTALLER ACCESS Command Information Zone 1 light will be ON to indicate that the Step 1: Press [8] [#] command has been accepted and the users are in “Installer Access” option. Zone light 1 will toggle ON/OFF according to...
AX1 LED User Manual Rev 1.0 4.0.9 PHONE LINE LOSS DETECTION Command Information Zone 1 light will be ON to indicate that the Step 1: Press [10] [#] command has been accepted and the users are in “Phone Line Loss Detection” option.
AX1 LED User Manual Rev 1.0 CHAPTER 5: KEYPAD SETTINGS In order to access the keypad setting, the system must be in normal mode. Command Information This options will toggle the door chime to ON/OFF Door Chime Press and hold for 2 sec...
AX1 LED User Manual Rev 1.0 CHAPTER 6: WHEN THERE IS AN EMERGENCY EMERGENCY ALARM In order to access this function, the system must be in normal mode Command Information If there is a „FIRE‟ Alarm will be triggered ARMED LED will flash indicate soft zone...
AX1 LED User Manual Rev 1.0 SYSTEM ALERT TO USER THROUGH TELEPHONE In case of any intrusion or emergency, this system will acknowledge users with an alarm report. The panel will contact the user through fixed telephone or mobile line. If the user is unable to reply the phone call, this system will call the user again.
AX1 LED User Manual Rev 1.0 6.3.1 WITH VOICE ACTIVE Answer Call Slow Beeps Press any key to acknowledge system System Violated System hangs up Press 1 for Security Menu 2 for Automation Menu Press [0] Thank you 3 for System Status...
AX1 LED User Manual Rev 1.0 6.3.2 WITH BEEPER (Without Voice Module) Answer Call Slow Beeps Press any key to acknowledge system Continuous tone with different frequency of 0.5 seconds Press any key within 1 minute to acknowledge 5 slow tones...
AX1 LED User Manual Rev 1.0 CHAPTER 7: SYSTEM CHECKING TROUBLE VIEW System must be in normal or armed mode in order to view trouble. Control panel will monitor a number of possible trouble conditions. If one of these conditions occurs, the SERVICE light will turn ON and remain ON until trouble free and/or it receives clearance instruction from the users.
AX1 LED User Manual Rev 1.0 TESTING SYSTEM Users are advised to test the system frequently. System must be tested at least once every three months. If the system is not functioning accordingly, please contact the nearest dealer for technical assistance. In order to test , system must be on normal mode. There are 4 types of tests: walk test, bell test, CMS test and battery test.
AX1 LED User Manual Rev 1.0 GLOSSARY Arming/Disarm To ARM is to ON the alarm system and to DISARM is to OFF the alarm system Battery A back up power source to provide protection for a limited time in the event of a power...
AX1 LED User Manual Rev 1.0 LIMITATIONS Even though AX1 is an advanced security system, it does not 100% guarantee protections against burglary, fire or other losses. Any alarm system whether commercial or residential is subject to compromise or failure-to-warn for a variety of reasons. These include: ...
AX1 LED User Manual Rev 1.0 SYSTEM INFORMATION MASTER USER: ADDRESS: TELEPHONE NUMBER: DATE : REMARKS : Telephone Number 1 Receiver Number 1 Receiver Type User / CMS Receiver Pattern Permanent / Backup CMS Account Number 1 Telephone Number 2...
Page 41
AX1 LED User Manual Rev 1.0 Zone Settings Zone Zone Type Zone Output Description Chime Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Light/Interior/Instant/Delay/24 Hours Yes/No Output Settings...
AX1 LED User Manual Rev 1.0 QUICK REFERENCE 1) To arm the house & other Fast Key Functions Key press Option Remark 1 and hold 2s Auto Home Arming mode When you leave the house 2 and hold 2s When you are at home day time...