AX1 LCD & ICON User Manual
2.1
AUTOMATION CONTROL USING LCD KEYPAD
Press [▼] or [▲] to choose
„AUTOMATION‟ from main menu
Press [#] to select.
Output control to on/ off IO one by one.
ON ALL or OFF ALL to control all.
Press [#] to toggle the output
If „ON‟, the output will turn „OFF‟ if [#] is pressed
If „OFF‟, the output will turn „ON‟ if [#] is pressed
Press [*] to return to main menu
2.1.1 QUICK AUTOMATION CONTROL
COMMAND
Press and hold the button [5] for 2 seconds
2.1.2 QUICK VIEW OF OUTPUT DESCRIPTION
Once at desired output, just press "0" to view the output description that have been
predetermine during installation using the voice setting.
2.1.3 QUICK VIEW OF OUTPUT STATUS
COMMAND
Press and hold the button [
Top Row [Output 1 to 16] starting from left to right
Bottom Row [Output 17 to 32] starting from left to right
01 - 01 – 2010 Mon
12 : 00
Press [User PIN] [*]
to enter user menu
AUTOMATION
SYSTEM
OUTPUT CONTROL
ON ALL
OUTPUT 1
- ON
OUTPUT 1
- OFF
▼
] for 2 seconds
INFORMATION
Automation control
INFORMATION
Output status 1-32.
O: On, X: Off, Blank: No output
Rev 4.0
20