Table of Contents
Advertisement
AX1 LCD & ICON User Manual
Telephony Control
– This function is to enable both the fax machine and the AX1 system control through
Double Call
phone feature to be integrated together. The user can choose to use the fax machine without the AX1
system picking up when called the first time. However, when user wishes to control AX1 system
through phone, user needs to do a double call. The Double Call means user need call for the first time
and hang up after 2 ring count then call again the second time and the AX1 system will pick up the
call.
Even though AX1 is an advanced security system, it does not 100% guarantee protections
against burglary, fire or other losses. Any alarm system whether commercial or residential is
subject to compromise or failure-to-warn for a variety of reasons. These include:
Intruders may gain access through unprotected openings or have the technical
sophistication to bypass an alarm sensor or disconnect an alarm warning device.
Intrusion detectors, smoke detectors and many sensing devices will not operate
without power. Devices powered by AC will not work if there is no AC power supply
for any reason and their back up batteries are missing, dead or improperly installed.
Alarm warning devices such as sirens or bells may not alert people or wake up sleeper
if they are located on the other side of closed or partly closed door.
Telephone lines needed to transmit alarm from the premise to a central monitoring
station may be out or temporarily out of service. Telephone station lines are subjected
to compromise by sophisticated method of attack.
Smoke detector used in conjunction with the alarm system may not sense fires that
start where smoke cannot reach the detector such as wall, roof or the other side of the
door. Smoke detector also may not sense a fire on another level of residence or
carelessness and safety hazards like smoking in the bed, violent explosions, escaping
gas, improper storage of flammable material, overloaded electrical circuits, and
children playing with matches.
The most common cause of an alarm system not functioning properly when an
intrusion or fire occurs is inadequate maintenance. Therefore, your system should be
tested weekly to ensure all sensors are working properly.
Installing an alarm system may make you eligible for lower insurance rates but an
alarm system is not substitute for insurance. Homeowners, property owners and
renters should continue to insure their lives and properties.
Note: Specifications subject to change without prior notice.
LIMITATIONS
Rev 4.0
80
Advertisement
Table of Contents
