System Call-Out With Beeper Interface - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual
7.3.2 SYSTEM CALL OUT WITH BEEPER INTERFACE
To Arm:
To Disarm:
To Check Alarm:
To ON Siren:
To OFF Siren:
To Bypass Zone:
To Restore Bypass Zone: [7][Zone Number][#]
To ON Output:
To OFF Output:
To Exit:
Remarks:
(i) Output Number
Press [0][1] to [0][8] for output 1- 8
Press [0][0] for all outputs
(ii) Zone Number:
Press [0][1] to [0][8] for Zone 1- 8
(iii) Check Alarm:
Once enter [3][#]:
to check next alarm report: [#] OR
Proceed with other control command
For Alarm Report:
Zone Beeper Reporting Format
Zone 1-8 Normal beep base on zone
Alarm number
Softzone & Continuous 6 beep
Tamper
Call Out
Answer theCall
Continuous Slow beep
Press any key
Event Tone
[1][#]
[2][#]
[3]#]
[4][#]
[5][#]
[6][Zone Number][#]
[8][Output Number][#]
[9][Output Number][#]
[0][#]
Example
Zone 2 alarm
AX1 Telephony beeper reporting format
Continuous tone for Alarm;
4 beep tone for ARM/DISARM/ZONE
RESTORE/TROUBLE (if reporting is enable)
Valid code/
Request Accepted
Acknowledgement
Tone
(Beep twice)
Invalid Code/
Request Rejected
Error/ Reject Tone
(Long Beep)
Legend
[ ]
Phone Keypress
System Respond
Action Flow
Beep...Beep...
Rev 4.0
73