Duress Alarm (Calling For Help); Tamper Loss And Phone Line Loss Alarm - O.Y.L. Technology AX1 User Manual

AX1 LCD & ICON User Manual
7.1

DURESS ALARM (CALLING FOR HELP)

In the event where the user is forced by an intruder or robber to disarm the alarm system, user
can disarm the alarm system by using Duress Code. By pressing Duress Code, user can
access the menu to disarm the system. At the same time, a silent signal will be sent to any
designated telephone number or central monitoring station (CMS) to call for help. (*
Provided the system is connected to CMS). The siren and strobe will not be activated. To set
the duress code, refer to section 4.0.4
7.2

TAMPER LOSS AND PHONE LINE LOSS ALARM

Fig 6.2(a)
Word "Alarm" flashes to indicate the alarm was triggered by the tamper switch loss. Word
"Armed" and arming icon is on to indicate the tamper violation was activated on „arm‟ (Fig
6.2(a)); else it was activated on ‟24 hours‟ (Fig 6.2(b)).
Word "Alarm" and "PHONE" flashes to indicate the alarm was triggered by the phone line
loss.
Fig 6.2(c)
Rev 4.0
Fig 6.2(b)
70