* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below, then set the delay (from 0-65,535 milliseconds)
by scanning digits from the inside back cover, then scanning Save.
User-Specified Reread Delay
2D Reread Delay
Sometimes 2D bar codes can take longer to read than other bar codes. If you wish to set a separate Reread Delay for 2D bar
codes, scan one of the programming codes that follows. 2D Reread Delay Off indicates that the time set for
Reread Delay
is
used for both 1D and 2D bar codes. Default = 2D Reread Delay Off.
* 2D Reread Delay Off
Short (1000ms)
Medium (2000ms)
Long (3000ms)
Extra Long (4000ms)
3 - 12