ES34069 Chassis User's Manual
Installing Riser Card
1
■ The PCI card mounting bracket must be detach and
use special one for mounting, (Ex. PCI RAID card)
3
■ Install the PCI card with riser into the slot gently.
(Please pay attention to the cable arrangement)
Installing 2.5" HDD
1
■ Place the 2.5" HDD underneath the Slim ODD
Note: To install 2.5" HDD, the M/B cage is required to disassemble.
www.chenbro.com
Rev. A1
2
■ Connect the cables before install.
4
■ Attach screws on the rear side to secure the PCI card
2
■ Fix the 2.5" HDD with attached screws
14