ES34069 Chassis User's Manual
To open the chassis for assembly of internal parts, users need to:
Remove the side panel
Remove the front bezel
Side Panel Removal
1
■ Release the side panel thumb screw on the rear
Front Bezel Removal
1
■ Lift up the latch along the side to detach the bezel
3
■ Angle the latch until it is 15 degree away from the
chassis
www.chenbro.com
Rev. A1
2
■ Push and slide the side panel toward rear to open the
chassis
2
■ Detach the bezel from Slim ODD side gently
4
■ gently pull the bezel to make it detach
8