Connecting Devices; Connecting Sata-Ii Cables; Connecting The Power - Chenbro ES34069 User Manual

ES34069 Chassis User's Manual

Connecting Devices

ES34069 is pre-installed with several cables inside as factory default,
which includes:
SATA-II cable for Hot-swap hard drive
Power cable for M/B
Front panel I/O cables
USB 2.0 cable
4-in-1 card reader

Connecting SATA-II Cables

1
■ Secure the heatsink clipper in another end
■ Check the bundled cable with number tag
Note: If there is no enough SATA port on M/B, users can either remove or keep the
bundled P3/P4 SATA cable.

Connecting the Power

1
■ The DC harness comes with 20+4 pin as main
connection for different M/B requirement.
www.chenbro.com
Rev. A1
2
■ Connect the SATA cables to the M/B properly
2
■ Install and secure the DC harness cable to the M/B
properly
15