Installing 3.5" Sata-Ii Hard Drive - Chenbro ES34069 User Manual

ES34069 Chassis User's Manual
3
■ Slide the assembled CD-ROM into the chassis

Installing 3.5" SATA-II Hard Drive

1
■ Remove the HDD Carrier from the chassis and place
the SATA-II HDD into it.
3
■ Slide in the assembled HDD into the chassis, suggest
install by the ID definition on the front panel
(No need to remove the front bezel)
www.chenbro.com
Rev. A1
4
■ Make sure the holder latch is secured when fully
seated
2
■ Attach the HDD screws on both sides
4
■ Make sure the carrier is fully seated
11