Installing Riser Card; Installing 2.5" Internal Hard Drive - Chenbro ES340 User Manual

ES340 Chassis
User's Manual
Installing Riser Card (optional):
1
■ The PCI card mounting bracket must be detach and
use special one for mounting, (Ex. PCI RAID card)
3
■ Gently install the PCI card with riser into the slot.
(Please pay attention to the cable arrangement)
Installing 2.5" HDD:
1
■ Place the 2.5" HDD underneath the Slim ODD
Note: (1) To install 2.5" HDD, the M/B cage is required to disassemble.
(2) IDE cable adaptor is required to connect 2.5" IDE HDD to the M/B.
www.chenbro.com
2
■ Connect the cables before install.
4
■ Attach screws on the rear side to secure the PCI card
2
■ Fix the 2.5" HDD with attached screws
14