Pci-E Card Installation; Figure 37 Rear Window Exchange; Figure 38 Riser Card And Riser Bracket Installation - Chenbro RM245 Series User Manual

RM245 Series

2-9 PCI-e Card Installation

Figure 37 Rear Window Exchange

1. Replace low profile rear window to full-height rear window.
2. Secure the rear window with two screws as shown.

Figure 38 Riser card and Riser Bracket Installation

3. Attach riser card on the riser bracket, ensure the alignment screw holes matched and T nails well-stuck.
4. Secure the riser card with one screw as shown.
5. Attach PCIe bracket on the PCIe card and ensure the alignment screw holes matched.
6. Secure PCIe bracket with two screws as shown.
7. Insert PCIe card into PCIe slot.
8. Secure PCIe card and riser bracket with one screw as shown.
/ Installation 34
│