Connecting Front Panel I/O And Leds - Chenbro ES34069 User Manual

ES34069 Chassis User's Manual

Connecting Front Panel I/O and LEDs

a. USB 2.0 cable connection
1
■ Front USB cable should be connected to on-board USB
header properly depends on different M/B.
b. Front display cable connection
1
■ The fan-out cable with different connection for:
Power on, HDD, LAN, FAIL and the front switch
c. Card reader cable connection
1
■ After installing the assembled Card Reader, the
shorter USB cable should be connected to the M/B
www.chenbro.com
Rev. A1
2
■ Connect to the M/B according to the M/B pin header
definition properly.
16