BLADEZ AEROPRO H930 Owner's Manual page 9

A. Stabilizer Assembly
1. Position the machine's rear on the Rear Stabilizer (122) as shown in figure 2. Tighten
securely using bolts (157) and Flat washers (158).
2. Position the front Stabilizer (28) with the wheels facing forward as shown in figure 2
paying attention to the red dots. Secure with the bolts (157) and Flat washers (158)
B. Pedals Assembly
Mounting the pedals incorrectly could damage the threads on either the pedals and/or the
crank. Therefore, the assembly instructions for the pedals must be followed to the letter.
Right and Left refer to the position that the user adopts when sitting on the seat to do the
exercises.
The Right-hand pedal, marked with the letter (50R), screws onto the right-hand crank, also
marked with an (R), in a clockwise direction. Tighten securely (Fig. 3).
The Left-hand pedal, marked with the letter (50L), screws onto the left-hand crank, also
marked with a letter (L), in a counter-clockwise direction. Tighten securely.
Fig. 2 : Stabilizer Assembly
7
AEROPRO