BLADEZ AEROPRO H930 Owner's Manual page 11

D. Installing Handlebar
Place the handlebar (4) on the handlebar stem (3) and tighten knob (5) shown in Fig. 4. Insert
the handlebar stem into the main body (74) shown in Fig. 11 and tighten the knobs (83 & 87) by
turning them clockwise. Plug the connector (14) from the handlebar post into the connector (89)
from the main body (74). Place the cap (15) and secure with screws (13) (Fig. 11)
·
Handlebar Height Adjust: loosen knob (83 & 87) slightly by turning counterclockwise a turn
or two. Move the handlebar up/down to a desired height and tighten the knobs in the
clockwise direction. Pay attention not to go beyond MIN INSERT mark
·
Handlebar Horizontal Adjust: loosen the knob (5) by turning counterclockwise; move the
handlebar to a distance comfortable for doing exercise and then tighten the knob (5).
Fig. 10
E. Attaching Bottle Holder
Mount the bottle holder (85) to the side of
the front fork using screws (86) (fig. 11)
Leveling: once the unit has been placed into
its final position, make sure it sits flat and
on
the floor. If needed, make adjustment for
the footpads (121) by dialing the wheels (121)
on the sides of the stabilizers (Fig. 12)
Fig. 11 Fig. 11
level
9
Fig. 12
AEROPRO