BLADEZ AEROPRO H930 Owner's Manual page 10

Figure 3
Left Pedal
Tightening
Direction
C. Seat Assembly
Loosen knob (129) and slide the seat bracket (127) onto the horizontal seat tube (3).
Tighten knob (129). Attach the seat (124) onto the seat bracket (127) and tighten the nuts
on the seat securely.
·
Seat Height Adjustment: loosen the seat post adjustment knob (83) slightly by turning it
counterclockwise a turn or two. Move the seat up/down to a desired height and tighten
the knob in the clockwise direction
·
Seat Horizontal Adjustment: loosen the knob (129); move the seat to a position
comfortable for doing exercise and then tighten the knob (129)
D. Installing the Monitor
Remove the computer stem covers (7 &
8). Remove 4 screws (2) from the base
of the monitor (1) then connect the
terminal (14) to the terminal on the
monitor. Slide the monitor onto the
holding bracket and secure with the 4
screws removed earlier (fig. 8). Attach
the post covers (7 & 8) and tighten
screws (10) as in figure (9)
127
Fig. 8
8
Right Pedal
Tightening
Direction
Fig. 9
AEROPRO