BLADEZ AEROPRO H930 Owner's Manual page 15

CONSOLE OPERATION (cont'd)
WATT Dependent Mode
This is available in Manual Mode only. This could also be viewed as Speed dependent mode. The
resistance level will automatically adjust to match the preset WATTS value taking speed into account.
If speed is too slow, resistance would increase to maintain the WATTS value and vice versa.
Program P1 – P12:
These are the pre-program profiles. To exercise using a program, press the Up/Down arrows to
highlight P1 - P12 on the console. As you scroll through the programs, the program number (P1, P2,
etc.) is displayed for 1 second and a profile of the program will follow. To select, stop at a program
(profile) and press MODE (to cancel or go back, press RESET once). TIME, DISTANCE, CALORIES
& HEART RATE are available for setting. Use keys to set value and press MODE to accept.
When finished, press Start to begin the workout. Once the program started, the first segment of the
profile will blink. Resistance level can be adjusted and this adjustment will affect the entire profile.
User:
This is a user designed workout. There are 16 segments to be designed for different levels or they
all could be left at the default level (lowest). To design User program, press the Up/Down arrows to
st
highlight USER on the console. Press Mode to enter programming mode and immediately 1
segment of the profile is blinking waiting for changes. Use to change the level of the blinking
segment. Move to the next segment by pressing Mode. When finished, press Start/Stop to begin
the program.
H.R.C.
H.R.C. program is short for Heart Rate Controlled program. As suggested, the exercise is mainly
driven by the instantaneous heart rate measured from the user by the machine. There are 4 heart
rate programs available under this mode: 55%, 75%, 90% and THR. Information such as: Age, Time,
Distance & Calories must be entered before the start of the exercise. Use to scroll through
the selection. The target heart rate will be displayed for each preset program. Press MODE to
select a program. In THR program, user has the option to preset the heart rate value. User must
wear a wireless heart rate belt for this program to work. When finished, press Start/Stop to begin the
exercise.
AEROPRO
13