Maintenance - BLADEZ AEROPRO H930 Owner's Manual

WARNING: Always unplug your elliptical prior to cleaning or servicing your unit, in order to avoid
electrical hazard or shock.
Care has been taken to assure that your machine has been properly adjusted and lubricated at the
factory. It is not recommended that the user attempt service on the internal components.
Instead, seek service from an authorized service center. However, from time to time, the outer
surfaces may appear dull or dirty. Follow the instructions below will restore and preserve the
original finish.
Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a
light application of car wax. Do not use aerosol spray or pump bottles as they may deposit
harmful substance on the console surface.
Over time, the console surface may collect dust or finger prints. The use of harsh chemicals will
destroy the protective coating and cause a static build up that will damage the components. This
surface may be cleaned with specially prepared chemicals found in most computer supply stores.
It is strongly recommended that you purchase such a cleaning compound.
MAINTENANCE INSTRUCTIONS
CLEANING
11
AEROPRO