System Board Shield - HP ProOne 400 G1 Maintenance & Service Manual

System board shield

The system board shield is located on the right side of the computer (when viewed from behind).
To remove the system board shield:
1.
Prepare the computer for disassembly (see
2.
Remove the rear cover (see
3.
Remove the VESA panel (see
4.
Remove the two Torx screws securing the system board shield to the chassis (1).
62 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Rear cover on page 34).
VESA panel on page 61).
31).