Computer Setup-File - HP ProOne 400 G1 Maintenance & Service Manual

Computer Setup—File
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Option
System Information
About
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Apply Defaults and
Exit
Ignore Changes
and Exit
Save Changes and
Exit
92 Chapter 7 Computer Setup (F10) Utility
Description
Lists:
Product name
●
Manufacturer
●
SKU number
●
Processor type/speed/stepping
●
Installed memory size/speed, number of channels
●
Integrated MAC address for embedded, enabled NIC (if applicable)
●
Chassis serial number
●
Asset tracking number
●
System Board ID
●
System Board CT Number
●
BIOS (includes family name and version)
●
Displays copyright notice.
Allows you to set system time and date.
Allows you to update the system ROM with a BIOS image file located on removable media.
Save to Removable Media
Saves system configuration to a formatted USB flash media device.
Restore from Removable Media
Restores system configuration from a USB flash media device.
Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Applies the currently selected default settings and clears any established passwords.
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration or default settings and exits Computer Setup.