HP ProOne 400 G1 Maintenance & Service Manual page 97

CAUTION:
Incorrect jumper placement can result in damage to the converter board and display
panel.
BOE panel: pins (1)(2)
●
LG panel: pins (3)(4)
●
To install a display panel, reverse the removal procedures.
NOTE: You MUST remove and replace all parts that come in the kit.
NOTE:
Do not reuse any old parts. Return all old parts to HP for warranty processing.
NOTE: You must remove and reuse the display brackets when you replace the panel.
For reinstallation, note the proper location of the cables on the back of the display panel.
Display panel
87