Replacing The Optical Disc Drive - HP ProOne 400 G1 Maintenance & Service Manual

6.
Tighten the captive screw (2) to secure the hard drive cage in the chassis.

Replacing the optical disc drive

The optical disc drive is located above the hard drive on the left side of the computer (when viewed
from behind).
1.
Prepare the computer for disassembly (see
2.
Remove the rear cover (see
The optical disc drive can now be seen in the upper left side of the chassis.
3. Loosen the captive screw (1) through the optical disc drive bracket that secures the optical disc
drive to the chassis.
NOTE:
optical disc drive. Remove the bracket from the chassis and follow the remaining steps using two
screws from the option kit to mount the bracket to the optical disc drive.
Rear cover on page
The optical disc drive bracket is installed on the chassis if the model does not have an
Preparing to disassemble the computer on page
34).
31).
Replacing drives
45