Replacing A Hard Drive; Removing A Hard Drive; Removing A 3.5-Inch Hard Drive - HP ProOne 400 G1 Maintenance & Service Manual

Description
320 GB, 7200 rpm hard drive, 2.5-inch, SATA-6G
256 GB solid-state drive (SSD), self-encrypting (SED)
180 GB solid-state drive (SSD), SATA 6.0, MLC
128 GB solid-state drive (SSD), Self-encrypting Drive (SED), SATA 6.0
120 GB solid-state drive (SSD), SATA 6.0, MLC
Hard drive removable frame carrier

Replacing a hard drive

The hard drive is located behind the rear cover on the lower left side of the computer (when viewed
from behind). The drive is housed in a removable cage.
Any one of the following may be installed in the computer:
One 3.5-inch hard drive
●
One 2.5-inch solid state drive (SSD), self-encrypting drive (SED), or solid state hybrid drive (SSHD)
●
NOTE:
drive.

Removing a hard drive

●
Installing a hard drive
●
Removing a hard drive

Removing a 3.5-inch hard drive

●
Removing a 2.5-inch solid state drive (SSD), self-encrypting drive (SED), or solid state hybrid drive
●
(SSHD)
Removing a 3.5-inch hard drive
1. Prepare the computer for disassembly (see
38 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
The 2.5-inch drive option kit from HP also contains the adapter required to install this
Preparing to disassemble the computer on page
Spare part number
754077-001
746141-001
754076-001
746140-001
756459-001
732060-001
31).