HP ProOne 400 G1 Maintenance & Service Manual page 57
All-in-one business pc
Hide thumbs
Also See for ProOne 400 G1:
- Maintenance & service manual (184 pages) ,
- Hardware reference manual (58 pages) ,
- Specification (48 pages)
Table of Contents
Advertisement
6.
Attach the optical disc drive bracket to the new optical disc drive by screwing the two screws
through the bracket into the new drive.
7.
Place the new optical disc drive into the chassis and push the drive in firmly until it snaps into
place (1).
NOTE:
The optical disc drive can be installed in only one way.
8.
Tighten the captive screw (2) through the optical disc drive bracket to secure the drive to the
chassis.
Replacing drives
47
- Quick Links:
- Resetting Setup and Power-On Password
Hide quick links:
Advertisement
Table of Contents
