Address Reservation - NETGEAR Sprint 6100D User Manual

Note: Port Filtering must currently be enabled. (See
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Filtering.
5. Select Black List.
6. To remove an application from the list click the
remove.
7. Click Submit.

Address Reservation

Address reservation lets you specify a specific IP address that the gateway assigns to a
computer or device when it connects to the gateway's local area network (LAN).
When you specify a reserved IP address for a computer on the gateway's local area network
(LAN), that computer always receives the same IP address each time it accesses the DHCP
server. Reserved IP addresses should be assigned to servers that require permanent IP
settings.
To reserve an IP address:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Address Reservation.
Gateway Settings
Port Filtering Panel: Enable Port
beside the row that you want to
Filtering.)
84